LKF.210S Beveling Machine by Euroboor

The LKF.210S Beveling Machine by Euroboor is engineered for beveling the edges of stainless steel sheets and tubes. This machine enables beveling of sheet edges as well as the edges of tubes with diameters ranging from 150 mm (6 inches) to 300 mm (12 inches) at angles from 0° to 60°, achieving a maximum bevel width of 21 mm (13/16 inches). When used with an optional guide—available for separate order—it can also operate on tubes with diameters greater than 300 mm (12 inches). The machine is equipped with dimmers that facilitate easier operation and help reduce unwanted vibrations.

The LKF.210S Beveling Machine is supplied in a metal box with a complete set of standard equipment. The package includes:

• Beveling Machine with a set of:
  • Cutting Blades – 1 piece
  • Metal Box – 1 piece
  • 8 mm Allen Wrench – 1 piece
  • 6 mm Allen Wrench – 1 piece
  • 4 mm Allen Wrench – 1 piece
  • 12 mm Flat Wrench – 1 piece
  • T15x100 Torx Screwdriver – 1 piece
  • Operator’s Manual – 1 piece